Duvac Epoxy Coating ( Flooring)
Deskripsi
Deskripsi Produk
Product Description
This is a two component amine cured solvent free epoxy coating. It is a high performance product. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance. To be used as finish coat in atmospheric environments. Suitable on approved primers on concrete substrates.
Typical Use
Designed for a wide range of floors with various levels of mechanical and chemical exposure. Recommended for warehouses, garages, dairies, factories, laboratories, aircraft hangars, food, beverage and plant rooms.
Data Teknis
Data Teknis
- Type, Two Compound
- Color, In Catalogue
- Finish, High Gloss
- Solid by Volume, 100%
- Specific Gravity, 1.25 ± 0.01
- Flash Point, >50-100 ̊C (Setaflash)
- Cure Time Apply, 30 – 35 minute
- Theoretical DFT, 500 Microns
- Theoretical Coverage, 1,1-1,24 m²/Kg-Set
- Drying Time, Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 10-12 hours (30 ̊C)
- Packaging, 20Kg Set (16Kg paint & 4Kg Harderner)
- Storage Stability, 1 year if stored cool, dry and sealed not opened
Aplikasi
Aplikasi :
- Thinner, Epoxy Thinner
- Application Method, Roller or Brush
- Mixing Ratio, 4 : 1 (Paint : Harderner)
- Re Coating Interval, 12-18 hour (30 ̊C)
- Temperature, Minimum 10 ̊C & Maximum 40 ̊C
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and within the DFT range of the product. Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness. Dry sand sprinkled on the surface can be brushed off without sticking to or causing damage to the surface. Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage. Dried to over coat, minimum: The shortest time allowed before the next coat can be applied. Dried to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied without any surface preparation. Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended environment/medium.
Colour variation
Products primarily meant for use as primers and antifoulings may have slight color variations from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.
Epoxy Basecoat
Product Data
- Type, Two Compound
- Color, White
- Finish, Semi Gloss
- Solid by Volume, 100%
- Specific Gravity, 1.36 ± 0.02
- Flash Point, 30 ̊C
- Cure Time Apply, 30 – 35 minute
- Drying Time, Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 12 hours (30 ̊C)
Aplication
- Thinner, Solvent Free
- Application Method, Coated before finishing Epoxy with Roscam
- Mixing Ratio, 4 : 1 (Paint : Harderner)
- Consuming m2, 0.25-0.35kg/M²
Epoxy Flooring
Product Data
Type,Two Compound
Color,White
Finish,Semi Gloss
Solid by Volume,100%
Specific Gravity, 1.36 ± 0.02
Flash Point, 30 ̊C
Cure Time Apply, 30 – 35 minute
Drying Time,Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 12 hours (30 ̊C)
Aplication
Thinner, Solvent Free
Application Method, Coated before finishing Epoxy with Roscam
Mixing Ratio, 4 : 1 (Paint : Harderner)
Consuming m2, 0.25-0.35kg/M²
Duvac Epoxy Self Leveling
Deskripsi
Deskripsi Produk
Product Description
This is a two component amine cured solvent free epoxy coating. It is a high performance product. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance. To be used as finish coat in atmospheric environments. Suitable on approved primers on concrete substrates.
Typical Use
Designed for a wide range of floors with various levels of mechanical and chemical exposure. Recommended for warehouses, garages, dairies, factories, laboratories, aircraft hangars, food, beverage and plant rooms.
Data Teknis
Data Teknis
- Type, Two Compound
- Color, In Catalogue
- Finish, High Gloss
- Solid by Volume, 100%
- Specific Gravity, 1.25 ± 0.01
- Flash Point, >50-100 ̊C (Setaflash)
- Cure Time Apply, 30 – 35 minute
- Theoretical DFT, 500 Microns
- Theoretical Coverage, 1,1-1,24 m²/Kg-Set
- Drying Time, Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 10-12 hours (30 ̊C)
- Packaging, 20Kg Set (16Kg paint & 4Kg Harderner)
- Storage Stability, 1 year if stored cool, dry and sealed not opened
Aplikasi
Aplikasi :
- Thinner, Epoxy Thinner
- Application Method, Roller or Brush
- Mixing Ratio, 4 : 1 (Paint : Harderner)
- Re Coating Interval, 12-18 hour (30 ̊C)
- Temperature, Minimum 10 ̊C & Maximum 40 ̊C
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and within the DFT range of the product. Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness. Dry sand sprinkled on the surface can be brushed off without sticking to or causing damage to the surface. Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage. Dried to over coat, minimum: The shortest time allowed before the next coat can be applied. Dried to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied without any surface preparation. Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended environment/medium.
Colour variation
Products primarily meant for use as primers and antifoulings may have slight color variations from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.
Epoxy Basecoat
Product Data
- Type, Two Compound
- Color, White
- Finish, Semi Gloss
- Solid by Volume, 100%
- Specific Gravity, 1.36 ± 0.02
- Flash Point, 30 ̊C
- Cure Time Apply, 30 – 35 minute
- Drying Time, Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 12 hours (30 ̊C)
Aplication
- Thinner, Solvent Free
- Application Method, Coated before finishing Epoxy with Roscam
- Mixing Ratio, 4 : 1 (Paint : Harderner)
- Consuming m2, 0.25-0.35kg/M²
Epoxy Flooring
Product Data
Type,Two Compound
Color,White
Finish,Semi Gloss
Solid by Volume,100%
Specific Gravity, 1.36 ± 0.02
Flash Point, 30 ̊C
Cure Time Apply, 30 – 35 minute
Drying Time,Surface Dry 3 – 4 Hours (30 ̊C), Hard Dry 12 hours (30 ̊C)
Aplication
Thinner, Solvent Free
Application Method, Coated before finishing Epoxy with Roscam
Mixing Ratio, 4 : 1 (Paint : Harderner)
Consuming m2, 0.25-0.35kg/M²
